|
|
Build Your Online Product Catalogs?
| Product Name: |
Steel sheet pile
|
| Supply Ability: |
|
| Related proudcts |
steel sheet, steel sheet pile, |
| Specifications |
WRU7,WRU8,WRU9,WRU10-450,WRU11-450,WRU12-450 |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
50 ton |
| Unit Price: |
|
|
A metal sheet pile has an improved joint strength and is suitable for high
productivity manufacturing. Right and left end flanges are formed at
opposite sides of the rolled steel sheet pile. Joints are formed at edges
of the right and left end flanges. Cross-sections of the joints are point-
symmetric or line-symmetric, wherein the end flange and the joint are
disposed
so that a center of point-symmetry of a pair of interfitted joints is
located on or near a centerline of the end flange in the thickness
direction. Furthermore, the joint has a protrusion for preventing rotation
near the border between the joint and the end flange portion.
Sheet pile walls are usually used in soft soils and tight ***ces. Sheet
pile walls are made out of steel, vinyl or wood planks which are driven
into the ground. For a quick estimate the material is usually driven 1/3
above ground, 2/3 below ground, but this may be altered depending on the
environment. Taller sheet pile walls will need a tie-back anchor, or "dead
-man" placed in the soil a distance behind the face of the wall, that is
tied to the wall, usually by a cable or a rod. Anchors are placed behind
the potential failure plane in the soil.
It is very important to have proper drainage behind the wall as it is
critical to the performance of retaining walls. Drainage materials will
reduce or eliminate the hydrostatic pressure and will therefore greatly
improve the stability of the material behind the wall, assuming that this
is not a retaining wall for water. Sheet piling is a form of driven piling
using thin interlocking sheets of steel to obtain a continuous barrier in
the ground. The main application of steel sheet piles is in retaining walls
and cofferdams erected to enable permanent works to proceed. Normally,
vibrating hammer, t-crane and crawle drilling are used to establish sheet
piles.
Contact:Wendy
Contact by: cnns AT chinasteelholding DOT com |
| Company: |
China New Steel Holding Group Co., Ltd
|
| Contact: |
Ms. wendy zhou |
| Address: |
10/F, Xichengxingui Edifice, Mengshan Road, Linyi, Shandong, China |
| Postcode: |
276000 |
| Tel: |
86-0539-7165539 |
| Fax: |
86-0539-7352434 |
| E-mail: |
|
|
|
|
Home
